Special cleaner with a combination of selected solvents. For the rapid, efficient cleaning and degreasing of structural components on two-wheelers. For cleaning chains with and without O/X-rings on two-wheelers and ATVs as well as drum and disk brake systems, their brake pads and components as well as brake callipers. Simple to use
absolutely free of chlorine
removes oil and grease-based contaminants
low surface tension
leaves no residues
high proportion of active components
controlled evaporation free of residues
dissolves resin and tar-type residues
optimum penetration capacity
optimizes economical use
Application
Place a box or rag under the parts to be cleaned. Spray dirty chains with Motorbike Chain and Brake Cleaner and let it run off. After the solvents have evaporated (approx. 10 min), the chain will be clean and free of grease and ready to be coated with Motorbike Chain Lube or Motorbike Chain Spray White . Do not spray onto plastics.
Important: With painted brake callipers and components as well as plastics, check for compatibility on a hidden area before application.